|
|
RF Mixer The MM1-0115HPSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0115HPSM works well as both an up and down converter through Ku band.
- MM1-0115HPSM-2
- Marki Microwave
-
1:
$291.45
-
9Expected 19/10/2026
-
New At Mouser
|
Mouser Part No
10-MM1-0115HPSM-2
New At Mouser
|
Marki Microwave
|
RF Mixer The MM1-0115HPSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0115HPSM works well as both an up and down converter through Ku band.
|
|
9Expected 19/10/2026
|
|
|
$291.45
|
|
|
$238.45
|
|
|
$201.76
|
|
|
$183.45
|
|
|
Quote
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MFBC-00004 is a connectorized evaluation board for the MFBC-00004CSP3 passive MMIC surface mount 15-19.8GHz bandpass filter.
Marki Microwave EVB-MFBC-00004
- EVB-MFBC-00004
- Marki Microwave
-
1:
$919.44
-
1Expected 27/8/2026
-
New Product
|
Mouser Part No
10-EVB-MFBC-00004
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MFBC-00004 is a connectorized evaluation board for the MFBC-00004CSP3 passive MMIC surface mount 15-19.8GHz bandpass filter.
|
|
1Expected 27/8/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MPD-0222S is a connectorized evaluation board for the MPD-0222SCSP2 MMIC 2-22GHz 2-Way power divider/power splitter.
Marki Microwave EVB-MPD-0222S
- EVB-MPD-0222S
- Marki Microwave
-
1:
$764.92
-
1Expected 27/8/2026
-
New Product
|
Mouser Part No
10-EVB-MPD-0222S
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MPD-0222S is a connectorized evaluation board for the MPD-0222SCSP2 MMIC 2-22GHz 2-Way power divider/power splitter.
|
|
1Expected 27/8/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter.
Marki Microwave EVB-MPD4-0218
- EVB-MPD4-0218
- Marki Microwave
-
1:
$764.92
-
Lead-Time 7 Weeks
-
New Product
|
Mouser Part No
10-EVB-MPD4-0218
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter.
|
|
Lead-Time 7 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
Marki Microwave EVB-ABDS-10170P
- EVB-ABDS-10170P
- Marki Microwave
-
1:
$919.44
-
1Expected 10/9/2026
-
New Product
|
Mouser Part No
10-EVB-ABDS-10170P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
|
|
1Expected 10/9/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A low-cost, cascadable broadband InGaP HBT amplifier. This is a general-purpose gain block amplifier which provides high P1dB, high OIP3, and a very small form factor.
- AKA-1400PSM
- Marki Microwave
-
1:
$82.74
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-AKA-1400PSM
New At Mouser
|
Marki Microwave
|
RF Amplifier A low-cost, cascadable broadband InGaP HBT amplifier. This is a general-purpose gain block amplifier which provides high P1dB, high OIP3, and a very small form factor.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
|
$82.74
|
|
|
$67.70
|
|
|
$53.19
|
|
|
$48.35
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVAL-MMIQ-0218L is a connectorized evaluation board for the MMIQ-0218LSM-2 Low LO Drive MMIC surface mount 2 - 18 GHz IQ Mixer.
- EVAL-MMIQ-0218L
- Marki Microwave
-
1:
$1,660.57
-
Non-Stocked Lead-Time 6 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-MMIQ-0218L
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-MMIQ-0218L is a connectorized evaluation board for the MMIQ-0218LSM-2 Low LO Drive MMIC surface mount 2 - 18 GHz IQ Mixer.
|
|
Non-Stocked Lead-Time 6 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVAL-BAL-0006 is a connectorized evaluation board for the BAL-0006 High Power surface mount 0.0005 - 6 GHz Balun.
- EVAL-BAL-0006
- Marki Microwave
-
1:
$976.32
-
Non-Stocked Lead-Time 9 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-BAL-0006
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-BAL-0006 is a connectorized evaluation board for the BAL-0006 High Power surface mount 0.0005 - 6 GHz Balun.
|
|
Non-Stocked Lead-Time 9 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
- ADM-0012-5931SM
- Marki Microwave
-
1:
$147.90
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-0012-5931SM
New At Mouser
|
Marki Microwave
|
RF Amplifier A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
|
$147.90
|
|
|
$123.24
|
|
|
$105.63
|
|
|
$96.04
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
- ADM-8344PSM
- Marki Microwave
-
25:
$178.43
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ADM-8344PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
- ADM-8475PSM
- Marki Microwave
-
25:
$103.37
-
Non-Stocked Lead-Time 10 Weeks
|
Mouser Part No
10-ADM-8475PSM
|
Marki Microwave
|
RF Amplifier The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
- ADM-8536PSM
- Marki Microwave
-
1:
$159.19
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8536PSM
New At Mouser
|
Marki Microwave
|
RF Amplifier The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
|
$159.19
|
|
|
$132.65
|
|
|
$113.71
|
|
|
$103.37
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
- ADM-8624PSM
- Marki Microwave
-
25:
$103.37
-
Non-Stocked Lead-Time 10 Weeks
|
Mouser Part No
10-ADM-8624PSM
|
Marki Microwave
|
RF Amplifier A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM-8625PSM
- Marki Microwave
-
1:
$40.96
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ADM-8625PSM
New At Mouser
|
Marki Microwave
|
RF Amplifier A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
- ADM-9027PSM
- Marki Microwave
-
1:
$189.61
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ADM-9027PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
|
$189.61
|
|
|
$158.00
|
|
|
$135.43
|
|
|
$123.12
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
- ADM-9028PSM
- Marki Microwave
-
25:
$126.21
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ADM-9028PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
- ADM-9181PSM
- Marki Microwave
-
1:
$201.09
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ADM-9181PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
|
$201.09
|
|
|
$167.58
|
|
|
$143.63
|
|
|
$130.57
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPFKFK
- Marki Microwave
-
1:
$110.38
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFKFK
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
- ADPFVFK
- Marki Microwave
-
1:
$163.38
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFVFK
New Product
|
Marki Microwave
|
RF Adapters - Between Series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPFVFV
- Marki Microwave
-
1:
$154.54
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFVFV
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPFVMK
- Marki Microwave
-
1:
$163.38
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPFVMK
New Product
|
Marki Microwave
|
RF Adapters - Between Series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPMKFK
- Marki Microwave
-
1:
$116.88
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPMKFK
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
- ADPMKMK
- Marki Microwave
-
1:
$116.88
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPMKMK
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Between Series The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
- ADPMVFK
- Marki Microwave
-
1:
$172.99
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPMVFK
New Product
|
Marki Microwave
|
RF Adapters - Between Series The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - In Series The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
- ADPMVFV
- Marki Microwave
-
1:
$163.64
-
Non-Stocked Lead-Time 12 Weeks
-
New Product
|
Mouser Part No
10-ADPMVFV
New Product
|
Marki Microwave
|
RF Adapters - In Series The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Singapore
