|
|
Signal Conditioning The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
- BAL-0026
- Marki Microwave
-
1:
$3,414.47
-
6On Order
-
New At Mouser
|
Mouser Part No
10-BAL-0026
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
|
|
6On Order
On Order:
2 Expected 11/12/2026
4 Expected 8/1/2027
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
300 kHz to 26.5 GHz
|
300 kHz to 26.5 GHz
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
Signal Conditioning MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
- MMIQ-0218LXPC
- Marki Microwave
-
1:
$3,307.78
-
13On Order
-
New At Mouser
|
Mouser Part No
10-MMIQ-0218LXPC
New At Mouser
|
Marki Microwave
|
Signal Conditioning MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
|
|
13On Order
On Order:
5 Expected 25/12/2026
8 Expected 12/1/2027
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
0 Hz to 3 GHz, 2 GHz to 18 GHz
|
0 Hz to 3 GHz, 2 GHz to 18 GHz
|
|
50 Ohms
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
- ADM-8344PC
- Marki Microwave
-
1:
$2,766.36
-
1Expected 1/1/2027
-
New At Mouser
|
Mouser Part No
10-ADM-8344PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
|
|
1Expected 1/1/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
- ADM1-0026PA
- Marki Microwave
-
1:
$1,696.56
-
3On Order
-
New At Mouser
|
Mouser Part No
10-ADM1-0026PA
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
|
|
3On Order
On Order:
1 Expected 29/9/2026
2 Expected 24/12/2026
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
5 MHz to 26.5 GHz
|
5 MHz to 26.5 GHz
|
|
50 Ohms
|
Connector
|
|
- 55 C
|
+ 85 C
|
|
|
|
Signal Conditioning A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM1-8096PC
- Marki Microwave
-
1:
$2,766.36
-
1Expected 11/12/2026
-
New At Mouser
|
Mouser Part No
10-ADM1-8096PC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
1Expected 11/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
- BAL-0003
- Marki Microwave
-
1:
$1,037.38
-
6On Order
-
New At Mouser
|
Mouser Part No
10-BAL-0003
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
|
|
6On Order
On Order:
2 Expected 30/10/2026
4 Expected 5/1/2027
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
200 kHz to 3 GHz
|
200 kHz to 3 GHz
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
Signal Conditioning The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
- BAL-0036
- Marki Microwave
-
1:
$5,015.00
-
2Expected 8/1/2027
-
New At Mouser
|
Mouser Part No
10-BAL-0036
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
|
|
2Expected 8/1/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Baluns
|
300 kHz to 36 GHz
|
300 kHz to 36 GHz
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
- BT-0018
- Marki Microwave
-
1:
$846.95
-
8Expected 11/12/2026
-
New At Mouser
|
Mouser Part No
10-BT-0018
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
|
|
8Expected 11/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Bias Tees
|
|
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
Signal Conditioning The C13-0140 is a broadband 1-40 GHz, 13 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
- C13-0140
- Marki Microwave
-
1:
$1,803.26
-
1Expected 24/12/2026
-
New At Mouser
|
Mouser Part No
10-C13-0140
New At Mouser
|
Marki Microwave
|
Signal Conditioning The C13-0140 is a broadband 1-40 GHz, 13 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
|
|
1Expected 24/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
- C20-0R520
- Marki Microwave
-
1:
$1,653.88
-
2Expected 25/9/2026
-
New At Mouser
|
Mouser Part No
10-C20-0R520
New At Mouser
|
Marki Microwave
|
Signal Conditioning The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
|
|
2Expected 25/9/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
- CA-50
- Marki Microwave
-
1:
$2,763.60
-
1Expected 23/10/2026
-
New At Mouser
|
Mouser Part No
10-CA-50
New At Mouser
|
Marki Microwave
|
Signal Conditioning This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
|
|
1Expected 23/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
- CBR16-0003
- Marki Microwave
-
1:
$1,483.16
-
3On Order
-
New At Mouser
|
Mouser Part No
10-CBR16-0003
New At Mouser
|
Marki Microwave
|
Signal Conditioning The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
|
|
3On Order
On Order:
1 Pending
2 Expected 25/9/2026
Factory Lead Time:
18 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
200 kHz to 3 GHz
|
200 kHz to 3 GHz
|
|
|
Connector
|
|
|
|
|
|
|
Signal Conditioning The CBR16-0006 offers the highest directivity of any standalone 6 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
- CBR16-0006
- Marki Microwave
-
1:
$1,803.26
-
1Expected 29/1/2027
-
New At Mouser
|
Mouser Part No
10-CBR16-0006
New At Mouser
|
Marki Microwave
|
Signal Conditioning The CBR16-0006 offers the highest directivity of any standalone 6 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
|
|
1Expected 29/1/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The EBAL-0040 is an ultra-broadband 1:2 balun (unbalanced to balanced transformer), hand-tuned for optimal amplitude and phase balance.
- EBAL-0040
- Marki Microwave
-
1:
$3,036.36
-
1Expected 17/9/2026
-
New At Mouser
|
Mouser Part No
10-EBAL-0040
New At Mouser
|
Marki Microwave
|
Signal Conditioning The EBAL-0040 is an ultra-broadband 1:2 balun (unbalanced to balanced transformer), hand-tuned for optimal amplitude and phase balance.
|
|
1Expected 17/9/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
- MEQ10-60ABH
- Marki Microwave
-
1:
$1,175.23
-
2Expected 5/1/2027
-
New Product
|
Mouser Part No
10-MEQ10-60ABH
New Product
|
Marki Microwave
|
Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
|
|
2Expected 5/1/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
- MM2-0530LS
- Marki Microwave
-
1:
$1,600.54
-
3Expected 31/12/2026
-
New At Mouser
|
Mouser Part No
10-MM2-0530LS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
|
|
3Expected 31/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
- MMIQ-0205HXA
- Marki Microwave
-
1:
$2,230.09
-
1Expected 2/10/2026
-
New At Mouser
|
Mouser Part No
10-MMIQ-0205HXA
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
|
|
1Expected 2/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0416HS
- Marki Microwave
-
1:
$2,987.65
-
1Expected 23/10/2026
-
New At Mouser
|
Mouser Part No
10-MMIQ-0416HS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
1Expected 23/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal Conditioning MMIQ-0520L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0520LS
- Marki Microwave
-
1:
$3,307.78
-
1Expected 29/1/2027
-
New At Mouser
|
Mouser Part No
10-MMIQ-0520LS
New At Mouser
|
Marki Microwave
|
Signal Conditioning MMIQ-0520L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
1Expected 29/1/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 20 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
- PD-0020
- Marki Microwave
-
1:
$782.08
-
4Expected 1/1/2027
-
New At Mouser
|
Mouser Part No
10-PD-0020
New At Mouser
|
Marki Microwave
|
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 20 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
|
|
4Expected 1/1/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Power Dividers
|
0 Hz to 20 GHz
|
0 Hz to 20 GHz
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
- PD-0140
- Marki Microwave
-
1:
$1,867.29
-
3Expected 1/1/2027
-
New At Mouser
|
Mouser Part No
10-PD-0140
New At Mouser
|
Marki Microwave
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
|
|
3Expected 1/1/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Power Dividers
|
|
|
|
50 Ohms
|
Connector
|
|
|
|
|
|
|
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
- T3-1040GLN
- Marki Microwave
-
1:
$2,550.19
-
2Expected 18/9/2026
-
New At Mouser
|
Mouser Part No
10-T3-1040GLN
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
|
|
2Expected 18/9/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
10 GHz to 40 GHz
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
- T3-12LQP
- Marki Microwave
-
1:
$2,014.54
-
3Expected 17/9/2026
-
New At Mouser
|
Mouser Part No
10-T3-12LQP
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
|
|
3Expected 17/9/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
10 MHz to 12 GHz, 1 MHz to 4 GHz
|
|
50 Ohms
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The T3-18G is a high performance mixer featuring LO/RF from 10 MHz to 18 GHz and IF from 1 MHz to 10 GHz.
- T3-18GLS
- Marki Microwave
-
1:
$2,550.19
-
1Expected 1/1/2027
-
New At Mouser
|
Mouser Part No
10-T3-18GLS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-18G is a high performance mixer featuring LO/RF from 10 MHz to 18 GHz and IF from 1 MHz to 10 GHz.
|
|
1Expected 1/1/2027
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
|
10 MHz to 18 GHz, 1 MHz to 10 GHz
|
|
50 Ohms
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
|
|
Signal Conditioning The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
- T3-20GLS
- Marki Microwave
-
1:
$2,550.19
-
1Expected 2/10/2026
-
New At Mouser
|
Mouser Part No
10-T3-20GLS
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
|
|
1Expected 2/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
Signal Conditioning
|
Mixers
|
10 MHz to 20 GHz
|
10 MHz to 20 GHz
|
|
|
Connector
|
|
- 55 C
|
+ 100 C
|
|
Singapore