|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
- PRT-09918
- SparkFun
-
1:
$1.70
-
243In Stock
|
Mouser Part No
474-PRT-09918
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
|
|
243In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relie
- PRT-11476
- SparkFun
-
1:
$2.01
-
56In Stock
|
Mouser Part No
474-PRT-11476
|
SparkFun
|
SparkFun Accessories This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relie
|
|
56In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories DC Barrel Power Jack Connector SMD
- PRT-12748
- SparkFun
-
1:
$2.71
-
45In Stock
|
Mouser Part No
474-PRT-12748
|
SparkFun
|
SparkFun Accessories DC Barrel Power Jack Connector SMD
|
|
45In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Connectors
|
|
|
|
|
SparkFun Accessories Stackable Header 3 Pin, Female 0.1in
- PRT-13875
- SparkFun
-
1:
$1.35
-
97In Stock
|
Mouser Part No
474-PRT-13875
|
SparkFun
|
SparkFun Accessories Stackable Header 3 Pin, Female 0.1in
|
|
97In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories These are simple 6-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.
- PRT-16499
- SparkFun
-
1:
$2.38
-
18In Stock
|
Mouser Part No
474-PRT-16499
|
SparkFun
|
SparkFun Accessories These are simple 6-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.
|
|
18In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Piezo Element
- SEN-10293
- SparkFun
-
1:
$2.38
-
40In Stock
|
Mouser Part No
474-SEN-10293
|
SparkFun
|
SparkFun Accessories Piezo Element
|
|
40In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Accessories
|
Audio Indicators & Alerts
|
|
|
|
SparkFun Accessories Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long.
- TOL-08794
- SparkFun
-
1:
$5.10
-
18In Stock
|
Mouser Part No
474-TOL-08794
|
SparkFun
|
SparkFun Accessories Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long.
|
|
18In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Unlock the hidden potential of your motherboard s USB headers. This 6-foot extension cable features a 4-pin female header on one end and a panel-mountable USB-A connector on the other allowing you to place a standard USB port exactly where you nee
- CAB-10177
- SparkFun
-
1:
$4.01
-
41In Stock
|
Mouser Part No
474-CAB-10177
|
SparkFun
|
SparkFun Accessories Unlock the hidden potential of your motherboard s USB headers. This 6-foot extension cable features a 4-pin female header on one end and a panel-mountable USB-A connector on the other allowing you to place a standard USB port exactly where you nee
|
|
41In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Cables
|
|
|
|
|
SparkFun Accessories There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn't one of them. Don't worry though we've got you covered. This 6ft converter plugs into your computer's USB port and provides you with a DB-9 RSR23
- CAB-11304
- SparkFun
-
1:
$44.81
-
14In Stock
|
Mouser Part No
474-CAB-11304
|
SparkFun
|
SparkFun Accessories There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn't one of them. Don't worry though we've got you covered. This 6ft converter plugs into your computer's USB port and provides you with a DB-9 RSR23
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good big reset button on a breadboard. Breadboard friend
- COM-09190
- SparkFun
-
1:
$1.02
-
205In Stock
|
Mouser Part No
474-COM-09190
|
SparkFun
|
SparkFun Accessories This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good big reset button on a breadboard. Breadboard friend
|
|
205In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Switches
|
|
|
|
|
SparkFun Accessories This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button but it lights up blue! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't ea
- COM-10443
- SparkFun
-
1:
$3.79
-
15In Stock
|
Mouser Part No
474-COM-10443
|
SparkFun
|
SparkFun Accessories This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button but it lights up blue! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't ea
|
|
15In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories MP3 and MIDI Codec - VS1063
- COM-11025
- SparkFun
-
1:
$14.89
-
67In Stock
-
90Expected 4/8/2026
|
Mouser Part No
474-COM-11025
|
SparkFun
|
SparkFun Accessories MP3 and MIDI Codec - VS1063
|
|
67In Stock
90Expected 4/8/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories This simple on-off switch is rated for 20A at 12V but who cares about all that it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They're also a great safe
- COM-11310
- SparkFun
-
1:
$6.46
-
44In Stock
|
Mouser Part No
474-COM-11310
|
SparkFun
|
SparkFun Accessories This simple on-off switch is rated for 20A at 12V but who cares about all that it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They're also a great safe
|
|
44In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Switches
|
|
|
|
|
SparkFun Accessories Tactile Button SMD (6mm)
- COM-12992
- SparkFun
-
1:
$1.02
-
58In Stock
|
Mouser Part No
474-COM-12992
|
SparkFun
|
SparkFun Accessories Tactile Button SMD (6mm)
|
|
58In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Amphenol FCI Clinchr Conn. (3 POS,F)
- COM-14196
- SparkFun
-
1:
$2.61
-
17In Stock
|
Mouser Part No
474-COM-14196
|
SparkFun
|
SparkFun Accessories Amphenol FCI Clinchr Conn. (3 POS,F)
|
|
17In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Connectors
|
Female FCI Clincher Connector with 3 Position
|
|
|
|
SparkFun Accessories Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation.
- PRT-00121
- SparkFun
-
1:
$1.43
-
155In Stock
|
Mouser Part No
474-PRT-00121
|
SparkFun
|
SparkFun Accessories Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation.
|
|
155In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Heat Sinks
|
|
|
|
|
SparkFun Accessories Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts
- PRT-09536
- SparkFun
-
1:
$2.86
-
46In Stock
|
Mouser Part No
474-PRT-09536
|
SparkFun
|
SparkFun Accessories Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts
|
|
46In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Connectors
|
|
|
|
|
SparkFun Accessories This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our shields and breakout boards.Note:** **This item is sold as each not in pairs.
- PRT-10030
- SparkFun
-
1:
$1.50
-
333In Stock
|
Mouser Part No
474-PRT-10030
|
SparkFun
|
SparkFun Accessories This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our shields and breakout boards.Note:** **This item is sold as each not in pairs.
|
|
333In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.
- PRT-10452
- SparkFun
-
1:
$2.18
-
12In Stock
|
Mouser Part No
474-PRT-10452
|
SparkFun
|
SparkFun Accessories Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Description: How could anyone improve on the clear plastic breadboard. I mean that's pretty sweet right?What if it was red?This translucent red breadboard is probably the coolest looking regular solderless breadboard there is. It has 2 power buses
- PRT-11317
- SparkFun
-
1:
$7.48
-
3In Stock
|
Mouser Part No
474-PRT-11317
|
SparkFun
|
SparkFun Accessories Description: How could anyone improve on the clear plastic breadboard. I mean that's pretty sweet right?What if it was red?This translucent red breadboard is probably the coolest looking regular solderless breadboard there is. It has 2 power buses
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Breadboards
|
|
|
|
|
SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
- PRT-15900
- SparkFun
-
1:
$2.38
-
9In Stock
|
Mouser Part No
474-PRT-15900
|
SparkFun
|
SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Connectors
|
Latch Terminal - 5mm Pitch (4-pin)
|
|
|
|
SparkFun Accessories Needle Nose Pliers
- TOL-08793
- SparkFun
-
1:
$4.90
-
88In Stock
|
Mouser Part No
474-TOL-08793
|
SparkFun
|
SparkFun Accessories Needle Nose Pliers
|
|
88In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories USB is being implemented as a power connection standard more and more these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC
- TOL-11456
- SparkFun
-
1:
$8.69
-
32In Stock
|
Mouser Part No
474-TOL-11456
|
SparkFun
|
SparkFun Accessories USB is being implemented as a power connection standard more and more these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC
|
|
32In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories The Solder Vacuum a great (and sometimes under appreciated) little tool for solder rework. It allows you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger heat up your solder place the nozzle
- TOL-13203
- SparkFun
-
1:
$9.45
-
3In Stock
|
Mouser Part No
474-TOL-13203
|
SparkFun
|
SparkFun Accessories The Solder Vacuum a great (and sometimes under appreciated) little tool for solder rework. It allows you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger heat up your solder place the nozzle
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
SparkFun Accessories Chip Quik No-Clean Flux Pen - 10mL
- TOL-14579
- SparkFun
-
1:
$14.46
-
34In Stock
|
Mouser Part No
474-TOL-14579
|
SparkFun
|
SparkFun Accessories Chip Quik No-Clean Flux Pen - 10mL
|
|
34In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Tools & Supplies
|
Chip Quik No-Clean Flux Pen
|
|