|
|
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
- T3-1040GLN
- Marki Microwave
-
1:
$2,507.14
-
4In Stock
-
New At Mouser
|
Mouser Part No
10-T3-1040GLN
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
- T3-12LQP
- Marki Microwave
-
1:
$1,980.53
-
5In Stock
-
New At Mouser
|
Mouser Part No
10-T3-12LQP
New At Mouser
|
Marki Microwave
|
Signal Conditioning The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A high-linearity low noise amplifier capable of providing +20 dBm output power up to 10 GHz. The ADM-8095PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM-8095PSM
- Marki Microwave
-
1:
$41.87
-
9In Stock
-
19Expected 5/6/2026
-
New At Mouser
|
Mouser Part No
10-ADM-8095PSM
New At Mouser
|
Marki Microwave
|
RF Amplifier A high-linearity low noise amplifier capable of providing +20 dBm output power up to 10 GHz. The ADM-8095PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
9In Stock
19Expected 5/6/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
- ABSD-10169PSM
- Marki Microwave
-
1:
$186.62
-
25Expected 26/6/2026
-
New Product
|
Mouser Part No
10-ABSD-10169PSM
New Product
|
Marki Microwave
|
Signal Conditioning The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
|
|
25Expected 26/6/2026
|
|
|
$186.62
|
|
|
$155.51
|
|
|
$133.30
|
|
|
$121.18
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
- BAL-0006
- Marki Microwave
-
1:
$1,136.44
-
10On Order
-
New At Mouser
|
Mouser Part No
10-BAL-0006
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
|
|
10On Order
On Order:
2 Expected 31/7/2026
8 Expected 14/9/2026
Factory Lead Time:
12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
- BAL-0012SSG
- Marki Microwave
-
1:
$642.78
-
10Expected 17/8/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0012SSG
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
|
|
10Expected 17/8/2026
|
|
|
$642.78
|
|
|
$494.45
|
|
|
$417.39
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The BAL-0032SSG is a surface-mount broadband balun, hand-tuned for optimal phase and amplitude balance over an industry leading 10 MHz to 32 GHz bandwidth.
- BAL-0032SSG
- Marki Microwave
-
1:
$819.78
-
20Expected 2/10/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0032SSG
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BAL-0032SSG is a surface-mount broadband balun, hand-tuned for optimal phase and amplitude balance over an industry leading 10 MHz to 32 GHz bandwidth.
|
|
20Expected 2/10/2026
|
|
|
$819.78
|
|
|
$630.60
|
|
|
$532.33
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
- BALH-0006
- Marki Microwave
-
1:
$1,311.26
-
6Expected 31/7/2026
-
New At Mouser
|
Mouser Part No
10-BALH-0006
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
|
|
6Expected 31/7/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
- BALH-0009SMG
- Marki Microwave
-
1:
$477.17
-
19Expected 17/8/2026
-
New At Mouser
|
Mouser Part No
10-BALH-0009SMG
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
|
|
19Expected 17/8/2026
|
|
|
$477.17
|
|
|
$367.06
|
|
|
$309.86
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
- BT-0018
- Marki Microwave
-
1:
$881.65
-
7Expected 7/7/2026
-
New At Mouser
|
Mouser Part No
10-BT-0018
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
|
|
7Expected 7/7/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Tee The BT2-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
- BT2-0040
- Marki Microwave
-
1:
$3,575.04
-
2Expected 26/6/2026
-
New At Mouser
|
Mouser Part No
10-BT2-0040
New At Mouser
|
Marki Microwave
|
RF Adapters - Tee The BT2-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
|
|
2Expected 26/6/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 12 GHz bandwidth.
- BTL-0012SMG-1
- Marki Microwave
-
1:
$288.05
-
10Expected 26/6/2026
-
New At Mouser
|
Mouser Part No
10-BTL-0012SMG-1
New At Mouser
|
Marki Microwave
|
Signal Conditioning A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 12 GHz bandwidth.
|
|
10Expected 26/6/2026
|
|
|
$288.05
|
|
|
$221.57
|
|
|
$187.04
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Adapters - Tee The BTN2-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
- BTN2-0050
- Marki Microwave
-
1:
$2,333.00
-
1Expected 28/8/2026
-
New At Mouser
|
Mouser Part No
10-BTN2-0050
New At Mouser
|
Marki Microwave
|
RF Adapters - Tee The BTN2-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
|
|
1Expected 28/8/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
- CA-50
- Marki Microwave
-
1:
$2,716.94
-
1Expected 23/10/2026
-
New At Mouser
|
Mouser Part No
10-CA-50
New At Mouser
|
Marki Microwave
|
Signal Conditioning This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
|
|
1Expected 23/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
- HLM-100001PSM
- Marki Microwave
-
1:
$107.73
-
134On Order
-
New At Mouser
|
Mouser Part No
10-HLM-100001PSM
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
|
|
134On Order
On Order:
9 Expected 14/8/2026
100 Expected 4/9/2026
25 Expected 8/9/2026
Factory Lead Time:
10 Weeks
|
|
|
$107.73
|
|
|
$89.77
|
|
|
$76.94
|
|
|
$69.94
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of 14 dBm.
- HLM-40PSM
- Marki Microwave
-
1:
$131.90
-
49Expected 20/7/2026
-
New At Mouser
|
Mouser Part No
10-HLM-40PSM
New At Mouser
|
Marki Microwave
|
Signal Conditioning The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of 14 dBm.
|
|
49Expected 20/7/2026
|
|
|
$131.90
|
|
|
$107.91
|
|
|
$91.32
|
|
|
$82.00
|
|
|
$77.08
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
- HLM-70CSP2
- Marki Microwave
-
1:
$191.99
-
20Expected 29/9/2026
-
New Product
|
Mouser Part No
10-HLM-70CSP2
New Product
|
Marki Microwave
|
Signal Conditioning The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
|
|
20Expected 29/9/2026
|
|
|
$191.99
|
|
|
$159.99
|
|
|
$137.14
|
|
|
$124.67
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of +11 dBm.
- HLM-8010CSP1
- Marki Microwave
-
1:
$144.06
-
94On Order
-
New At Mouser
|
Mouser Part No
10-HLM-8010CSP1
New At Mouser
|
Marki Microwave
|
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of +11 dBm.
|
|
94On Order
On Order:
69 Expected 13/7/2026
25 Expected 7/8/2026
Factory Lead Time:
10 Weeks
|
|
|
$144.06
|
|
|
$120.05
|
|
|
$102.90
|
|
|
$93.55
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip scale package.
- MBAL-0220CSP2
- Marki Microwave
-
1:
$266.53
-
44Expected 26/6/2026
-
New At Mouser
|
Mouser Part No
10-MBAL-0220CSP2
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip scale package.
|
|
44Expected 26/6/2026
|
|
|
$266.53
|
|
|
$222.12
|
|
|
$190.37
|
|
|
$173.07
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
- MBAL-0250CSP2
- Marki Microwave
-
1:
$371.02
-
68On Order
-
New Product
|
Mouser Part No
10-MBAL-0250CSP2
New Product
|
Marki Microwave
|
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
|
|
68On Order
On Order:
18 Expected 5/6/2026
25 Expected 26/6/2026
25 Expected 21/8/2026
Factory Lead Time:
10 Weeks
|
|
|
$371.02
|
|
|
$309.18
|
|
|
$265.00
|
|
|
$240.91
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system design.
- MBAL-0R106CSP2
- Marki Microwave
-
1:
$197.24
-
25Expected 21/8/2026
-
New Product
|
Mouser Part No
10-MBAL-0R106CSP2
New Product
|
Marki Microwave
|
Signal Conditioning The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system design.
|
|
25Expected 21/8/2026
|
|
|
$197.24
|
|
|
$164.37
|
|
|
$140.89
|
|
|
$128.07
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system design.
- MBAL-0R520CSP2
- Marki Microwave
-
1:
$303.20
-
50On Order
-
New Product
|
Mouser Part No
10-MBAL-0R520CSP2
New Product
|
Marki Microwave
|
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system design.
|
|
50On Order
On Order:
25 Expected 10/6/2026
25 Expected 14/8/2026
Factory Lead Time:
10 Weeks
|
|
|
$303.20
|
|
|
$252.66
|
|
|
$216.58
|
|
|
$196.88
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.
- MFBP-00002PSM
- Marki Microwave
-
1:
$198.53
-
25Expected 10/7/2026
-
New At Mouser
|
Mouser Part No
10-MFBP-00002PSM
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.
|
|
25Expected 10/7/2026
|
|
|
$198.53
|
|
|
$162.44
|
|
|
$137.44
|
|
|
$124.95
|
|
|
$116.02
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Mixer The MM1-0222HSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0222HSM works well as both an up and down converter through Ku band and beyond.
- MM1-0222HSM-2
- Marki Microwave
-
1:
$250.63
-
39On Order
-
New At Mouser
|
Mouser Part No
10-MM1-0222HSM-2
New At Mouser
|
Marki Microwave
|
RF Mixer The MM1-0222HSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0222HSM works well as both an up and down converter through Ku band and beyond.
|
|
39On Order
On Order:
14 Expected 17/7/2026
25 Expected 28/7/2026
Factory Lead Time:
10 Weeks
|
|
|
$250.63
|
|
|
$205.07
|
|
|
$173.51
|
|
|
$157.77
|
|
|
$146.48
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Mixer The MM1-0222LSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0222LSM works well as both an up and down converter through Ku band and beyond.
- MM1-0222LSM-2
- Marki Microwave
-
1:
$278.81
-
Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-MM1-0222LSM-2
New At Mouser
|
Marki Microwave
|
RF Mixer The MM1-0222LSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0222LSM works well as both an up and down converter through Ku band and beyond.
|
|
Lead-Time 10 Weeks
|
|
|
$278.81
|
|
|
$228.11
|
|
|
$193.02
|
|
|
$175.50
|
|
|
$162.94
|
|
Min.: 1
Mult.: 1
|
|
|
